Exploration of Molecular Nanoparticles as Soft Structural Materials and Their Structure-Property Relationship.

The search for alternative chemical systems other than polymers with chain topologies for soft structural materials raises general interests in fundamental materials and chemical sciences. It is also appealing from an engineering perspective for the urgent need to resolve the typical trade-offs of polymer systems. Herein, a subnanometer molecular cluster, polyhedral oligomeric silsesquioxanes, is assembled into molecular nanoparticles (MNPs) with star topology. Broadly tunable viscoelasticity can be realized by fine-tuning the MNPs' deformability. Being analogous to polymeric systems, the hierarchical structural relaxation dynamics can be observed, and their relaxation time and temperature dependence are dominated by the linker flexibilities. This not only provides microscopic understanding on MNP's unique viscoelasticity but also offers enormous opportunities for modulating their mechanical properties via linker engineering. Our work proves the possibility of applying structural units with particle topologies for the design of soft structural materials.

Particle topology-regulated relaxation dynamics in cluster-ordering.

The granular materials of soft particles (SPs) demonstrate unique viscoelasticity distinct from general colloidal and polymer systems. Exploiting dynamic light scattering measurements, together with molecular dynamics simulations, we study the diffusive dynamics of soft particle clusters (SPCs) with spherical and cylindrical brush topologies, respectively, in the melts of SPs. A topologically constrained relaxation theory is proposed by quantitatively correlating the relaxation time to the topologies of the SPCs, through the mean free space (Va) of tethered SPs in the cluster. The tethered SPs in SPCs are crowded by SPs of the melts to form the cage zones, and the cooperative diffusion of the tether SPs in the zones is required for the diffusive motion of SPCs. The cage zone serves as an entropic barrier for the diffusion of SP clusters, while its strength is determined by Va. Three characteristic modes can be confirmed: localized non-diffusive mode around critical Va, diffusive mode with Va deviating far from the critical value, and a sub-diffusive mode as an interlude between two limits. Our studies raise attention to the emergent physical properties of materials based on SPs via a topological design while opening new avenues for the design of soft structural materials.

Unique Viscoelasticity and Hierarchical Relaxation Dynamics of Molecular Granular Materials.

Resulting from the dense packing of subnanometer molecular clusters, molecular granular materials (MGMs) are shown to maintain high elasticity far above their apparent glass transition temperature (Tg*). However, our microscopic understanding of their structure-property relationship is still poor. Herein, 1 nm polyhedral oligomeric silsesquioxanes (POSSs) are appended to a backbone chain in a brush configuration with different flexible linker chains. Assemblies of these brush polymers exhibit hierarchical relaxation dynamics with the glass transition arising from the cooperative dynamics of packed POSSs. The interaction among the assemblies can be strengthened by increasing the rigidity of linkers with the MGM relaxation modes changing from colloid- to polymer chain-like behavior, rendering their tunable viscoelasticity. This finally contributes to the decoupling of mechanical and thermal properties by showing elasticity dominant mechanical properties at a temperature 150 K above the Tg*.

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X-rays and Neutrons.

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

The Coordination Nanocages-Integrated Polymer Brush Networks for Flexible Microporous Membranes with Exceptional H2 /CO2 Separation Performance.

The emergence of polymers with intrinsic microporosity provides solutions for flexible gas separation membranes with both high gas permeability and selectivity. However, their applications are significantly hindered by the costly synthetic efforts, limited availability of chemical systems, and narrow window of microporosity sizes. Herein, flexible mixed matrix membranes with tunable intrinsic microporosity can be facilely fabricated from the coordination assembly of polymer brushes and coordination nanocages. Polymer brushes bearing isophthalic acid side groups can coordinate with Cu2+ to assemble into polymer networks crosslinked by 2 nm nanocages. The semi-flexible feature of the polymer brush and the high crosslinking density of the network prevent the network from collapsing during solvent removal and the obtained aerogels demonstrate hierarchical structure with dual porosity from the crosslinked polymer network and coordination nanocage, respectively. The porosity can be facilely tuned via the amount of Cu2+ by regulating the network crosslinking density and nanocage loadings, and finally, optimized gas separation that surpasses Robeson upper bound for H2 /CO2 can be achieved. The coordination-driven assembly protocol paves a new avenue for the cost-effective synthesis of polymers with intrinsic microporosity and the fabrication of flexible gas separation membranes.

Modulating Ligand-Exchange Dynamics on Metal-Organic Polyhedra for Reversible Sorting and Hybridization of Miktoarm Star Polymers.

The precise synthesis of miktoarm star polymers (MSPs) remains one of the great challenges in synthetic chemistry due to the difficulty in locating appropriate structural templates and polymer grafting/growing strategies with high selectivity and efficiency. Herein, ≈2 nm metal-organic polyhedra (MOPs), constructed from the coordination of isophthalic acid (IPA) and Cu2+ , are applied as templates for the precise synthesis of 24-arm MSPs for their unique logarithmic ligand-exchange dynamics. Six different polymers are prepared with IPA as an end group and they further coordinated with Cu2+ to afford the corresponding 24-arm star homo-polymers. MSPs can be obtained by mixing targeted homo-arm star polymers in solutions upon thermal annealing. The compositions of MSPs can be facilely and precisely tuned by the recipe of the star polymer mixtures used. Interestingly, the obtained MSPs can be sorted into homo-arm star polymers through a typical solvent extraction procedure. The hybridization and sorting process can be reversibly conducted through the cycle of thermal annealing and solvent treatment. The complex coordination framework not only opens new avenues for the facile and precise synthesis of MSPs and MOPs with hybrid functionalities, but also provides the capability to design sustainable polymer systems.

Scalable synthesis of soluble crystalline ionic-graphdiyne by controlled ion expansion.

Graphdiyne (GDY) is a promising material possessing extensive electronic tunability, high π conjugacy, and ordered porosity at a molecular level for the sp/sp2-hybridized periodic structures. Despite these advantages, the preparation of soluble and crystalline graphdiyne is limited by the relatively compact stacking interactions, mostly existing in thick-layer and insoluble solids. Herein, we proposed a strategy of "framework charge-induced intercalation (FCII)" for the synthesis of a soluble (4.3 mg ml-1) and yet interlayer-expanded (∼0.6 Å) crystalline ionic graphdiyne, named as N+-GDY, through regulating the interlayer interactions. The skeleton of such a sample is positively charged, and then the negative ions migrate to the interlayer to expand the space, endowing the N+-GDY with solution processability. The crystal structure of N+-GDY is proved through analysis of HR-TEM images under different axes of observation and theoretical simulations. The resulting N+-GDY possesses high dispersity in organic solvents to produce a pure-solution phase which is conducive to the formation of oriented N+-GDY films, accompanied by exfoliation-nanosheet restacking. The film exhibits a conductivity of 0.014 S m-1, enabling its applications in electronic devices.

The counterion-mediated controllable coacervation of nano-ions with polyelectrolytes.

Nano-ions can complex with polyelectrolytes for coacervates with hierarchical structures; however, the rational design of functional coacervations is still rare due to the poor understanding of their structure-property relationship from their complex interaction. Herein, 1 nm anionic metal oxide clusters, PW12O403-, with well-defined, mono-disperse structures are applied to complex with cationic polyelectrolyte and the system shows tunable coacervation via the alternation of counterions (H+ and Na+) of PW12O403-. Suggested from Fourier transform infrared spectroscopy (FT-IR) and isothermal titration studies, the interaction between PW12O403- and cationic polyelectrolytes can be modulated by the bridging effect of counterions via hydrogen bonding or ion-dipole interaction to carbonyl groups of polyelectrolytes. The condensed structures of the complexed coacervates are explored by small angle X-ray and neutron scattering techniques, respectively. The coacervate with H+ as counterions shows both crystallized and discrete PW12O403- clusters, with a loose polymer-cluster network in comparison to the system of Na+ which shows a dense packing structure with aggregated nano-ions filling the meshes of polyelectrolyte networks. The bridging effect of counterions helps understand the super-chaotropic effect observed in nano-ion system and provides avenues for the design of metal oxide cluster-based functional coacervates.

Surface Functionality-Regulated and Entropy-Driven Thermodynamics of the Formation of Coordination Nanocages.

Coordination nanocages (CNCs) are under intense research in nanoscience and supramolecular chemistry for their enriched surface functionalities and micro-porosity; however, the understanding of their formation mechanism is still poor due to the difficulty in probing their solution structures. Herein, the CNC formation process from the coordination complexation of the macromolecular isophthalic acid (IPA) ligand and Cu2+ is studied via isothermal titration calorimetry, and its entropy-driven feature is revealed to be originated from the collapse of solvation layers of the assembly units. The CNC formation is thermodynamically less favored with smaller binding constants when the sizes of macromolecular IPA ligands are larger, which originated from the space crowding of macromolecules of the ligands on CNC surfaces and the resulting entropy loss of polymer chain conformations. Meanwhile, the chemical equilibrium of CNC formation can be tuned upon altering the Cu2+/IPA ratio, and the yield of CNCs, suggested from size exclusion chromatography studies, decreases when excessive Cu2+ is applied, providing guidelines for CNC design and synthesis.